Step 1. Download the fillable PDF below and complete the form.
Step 2. Fill out the form and upload the completed pdf document at the bottom.
Please Note: Fill out the information on the forms according to your knowledge. (ie. If you aren't shipping finishing wires for your doctor, only fill out the primary bracket part number page on the fillable pdf. The same goes for the inverted brackets; if you are unsure if your doctor will be inverting brackets, leave that page blank.
Bracket Rep Name
Bracket Rep Email
Attach Fillable Part Number PDF
Please check your email for information about shipping brackets and finishing wires to DIBS AI.
*Please fill in personal information
831 E 340 S #170
American Fork, UT 84003
© 2023 OrthoSelect.
CAD created and 3D printed, the Owen Tripod Splint is designed for fit and built for comfort and durability.
The Owen Splint is designed for use on both arches and has 3 raised surfaces (the tripod) that allows a doctor to quickly and easily adjust for the patient. With Splints on both the upper and lower the jaw is allowed to naturally skate and move.
Keystone Industries KeySplint Soft®️ resin
The Owen Tripod Splint is for heavy grinders and is extremely durable because of the splint- on-splint design. Minimal thickness is 1.4mm with additional buildup on the occlusal surfaces which are virtually flat. The material used is very strong, yet flexes slightly as the patient grinds.
CAD created and 3D printed, the OrthoSelect Standard Splint is designed for fit and built for comfort and durability.
We use digital articulation with a slight anterior canine guidance as well as slightly varied surface to accommodate cusp tips and deliver balanced contact to support existing tooth position and natural jaw movement (or “skating”).
Minimal thickness is 1.4mm with additional buildup on the occlusal surfaces. The material used is very strong, yet flexes slightly as the patient grinds.